|
USA Technologies
EnergyMiser® Products
VendingMiser® Line
|
|
|
VendingMiser® - Product Line
|
|
VendingMiser® VM150 with PIR (Passive Infra-Red) Occupancy Sensor. Wall-mounted for indoor use.
Use in locations where vending machine placements are not subject to change.
Separate sensor assembly provides flexibility in placement to achieve best occupancy detection.
Parts Included:
1 VendingMiser Controller
1 Wall Mounting Plate
1 Indoor Occupancy Sensor w/ mounting bracket
|
|
VendingMiser® VM151 with internal Sensor Repeater. Wall mount for indoor use as
secondary unit with a VendingMiser VM150. Includes a 10' repeater cable to connect to a VM150.
Up to three VM151 units can be connected to a VM150 for a total of four units controlled by one sensor.
Parts Included:
1 VendingMiser Controller
1 Wall Mounting Plate
1 10' Repeater Cable
|
|
VendingMiser® VM160 with weatherproof PIR Occupancy Sensor and weatherproof controller housing.
Wall-mounted for outdoor use. Use in locations where vending placements are not subject to change.
Separate sensor assembly provides flexibility in placement to achieve best occupancy detection.
Parts Included:
1 VendingMiser Controller
1 Outdoor Wall Mounting Plate
1 Outdoor Occupancy Sensor
1 Weatherproof Enclosure with screws
|
|
VendingMiser® VM161 with internal Sensor Repeater and weatherproof controller housing.
Wall mount for outdoor use. Use as secondary unit to the VM160. Includes 10' data cable to
connect to primary VendingMiser. Up to three VM161 units can be connected to a primary
VendingMiser for a total of four units controlled by one sensor.
Parts Included:
1 VendingMiser Controller
1 Outdoor Wall Mounting Plate
1 10' Repeater Cable
1 Weatherproof Enclosure with screws
|
|
VendingMiser® VM170 with PIR Occupancy Sensor. EZ Mount Z-Bracket for indoor use
attaches directly to a vending machine with industrial strength Velcro. Installs quickly
and allows VendingMiser® to move with machine. Use in locations where machine
placements are subject to change or if wall mounting is not desired.
Parts Included:
1 VM170 assembled and ready for installation
|
|
VendingMiser® VM171 Controller with internal Sensor Repeater for indoor use.
Use as secondary unit with a VendingMiser VM170. Includes a 10' repeater cable to
connect to a VM150 or VM170. Up to three VM171 secondary units can be connected to a
primary VendingMiser® for a total of four units controlled by one sensor.
Parts Included:
1 VM171 ready for installation
1 10' Repeater Cable
|
|
VendingMiser® VM180 with weatherproof PIR Occupancy Sensor and weatherproof
controller housing. EZ Mount Z-Bracket for outdoor use attaches directly to a vending
machine with industrial strength Velcro. Installs quickly and allows VendingMiser®
to move with machine. Use in outdoor locations where vending placements are subject
to change or if wall mounting is not desired.
Parts Included:
1 VM180 assembled and ready for installation
|
|
VendingMiser® VM181 Controller with internal Sensor Repeater and weatherproof
controller housing. For outdoor use. Use as secondary unit to the VM180. Includes a 10'
repeater cable to connect to a primary VendingMiser®. Up to three VM181 units
can be connected to primary VendingMiser® for a total of four units controlled by one sensor.
Parts Included:
1 VM181 ready for installation
1 10' Repeater Cable
|
|
VendingMiser® VM2iQ® incorporates the innovative, energy-saving
VendingMiser® technology into a 3" plug-and-play device that installs internally
into the vending machine. Provides an immediate, cost-effective and energy-efficient
upgrade to existing installed vending machines.
Parts Included:
The VendingMiser® VM2iQ® comes ready for installation
Internal access to the vending machine is required
Mounting bracket is attached to unit
|
|
if you have any questions about products, please
contact us
|
|
