SlipSolv™ is NOT a coating. It is a cost-effective, non-slip treatment that provides
an 80% increase in gripping ability. The environmentally-friendly compound is sprayed on, allowed to work
and then removed. The treatment reacts with sand silica in any mineral surface such as concrete
and ceramic tile to create an undetectable tread pattern on the surface.
Add slip resistance without adding a layer of grit!
concrete
ceramic tile
porcelain
terrazzo
polished stone
|
marble
slate
quarry tile
river rock
glazed brick
|
The treatment creates millions of microscopic indentations, like an inverted pebbling effect.
The average increase in “gripping effect” is 80%. There is no change in appearance of the
treated surface, except a cleaner look.
SlipSolv™ releases any deeply ingrained dirt. It flushes the pores, giving a fresh look to
the surface. It is hard to tell that anything has been done to the surface until you feel the
difference with your feet!
|
note: not for polished or high gloss floors
dining rooms/kitchens
swimming pools/tile decks
work areas/garage floors
bathtubs/showers
sidewalks/garden path
stairs/walkways
entryways/lobbies
~80% grip increase
1/2 US gal treats 150-200 sq/ft
|